What VLT Means for Window Tint
Visible light transmission, or VLT, is the percentage of visible light that passes through a window and its tint film. Tint laws in most states are written as VLT percentages, so reading the number correctly matters.
- What VLT measures
- Percentage of visible light a window passes through
- Higher vs lower number
- Higher percentage passes more light; lower is darker
- Federal glazing standard
- FMVSS 205, 49 CFR 571.205
- Standard's stated purpose includes
- A necessary degree of transparency in motor vehicle windows for driver visibility
- Technical specification incorporated
- ANSI/SAE Z26.1-1996
How a VLT percentage reads
VLT is a measure of light that gets through, not light that is blocked. A higher percentage means a lighter window that passes more light, and a lower percentage means a darker window that passes less. A film rated at 35 percent VLT lets about 35 percent of visible light through and holds back the rest.
The percentage describes the whole window as measured, which generally means the glass plus any film applied to it. Factory glass already passes less than 100 percent of light, so the finished reading is lower than the number printed on a film by itself. State pages on this site give each limit as the percentage the state statute states.
What the federal glazing standard says
The federal rule for vehicle glass is Federal Motor Vehicle Safety Standard 205, found at 49 CFR 571.205. Its stated purposes include reducing injuries from impact to glass, ensuring a necessary degree of transparency in motor vehicle windows for driver visibility, and limiting the chance that occupants are thrown through windows in a crash.
The regulation text does not itself list a transmittance percentage in the sections reviewed. Instead it requires glazing to conform to ANSI/SAE Z26.1-1996, which it incorporates by reference, so the technical test details sit in that referenced standard rather than in the CFR text.
Federal glazing rule versus state tint limits
FMVSS 205 governs glazing materials for motor vehicles and equipment. State tint statutes are separate laws that set their own percentage limits, which differ by state, by window position, and sometimes by vehicle type.
Because the numbers vary, the state pages on this site list each limit as written in that state's statute, with a link to the official source. This explainer covers only how to read the number.
Sources
- eCFR (Electronic Code of Federal Regulations) (federal regulation)
- Cornell Legal Information Institute (reading mirror only) (federal regulation)
Last checked October 2026. RulesByState is informational only and not legal advice.
Frequently asked questions
Does a lower VLT number mean darker tint?
Yes. VLT is the share of light that passes through, so a lower percentage means a darker window.
Does the federal glazing standard set one tint percentage for every state?
In the sections reviewed, 49 CFR 571.205 points to ANSI/SAE Z26.1-1996 for technical requirements and does not state a tint percentage. State tint limits come from state statutes.
Where are the numbers for my state?
On the state tint pages of this site, each cited to the state's official statute.
Find a state rule
No pages match your search.